Left Hand Carbide Cutting Tap Spiral Flute Solid Carbide for Blind Hole Aluminum Steel Threading

Short Description:

Engineered from ultra-fine grain solid carbide, this left-hand spiral flute tap is designed for counterclockwise (left-hand) internal threading in blind holes and through holes. The spiral flute geometry works with the left-hand cutting direction to pull chips back out of the hole, keeping flutes clear during high-speed tapping.


  • Material: Solid Carbide
  • Type: Spiral Flute Tap
  • Direction: Left-Hand
  • Thread Standard: Metric M; UNC/UNF optiona
  • Accuracy: 6H / 7H
  • Coating: TiN / TiCN / AlTiN

Product Detail

Product Tags

Left-Hand-Carbide-Cutting-Tap_3

Bullet Points

Left-Hand Thread Design: Tightens counterclockwise, helping prevent components from loosening under rotational forces — ideal for reverse-operating parts and special assembly requirements

Efficient Chip Evacuation: Spiral flute matched to the left-hand cutting direction carries chips smoothly out of the hole, effectively reducing tap breakage caused by chip clogging

Ultra-Fine Grain Solid Carbide: Hardness ≥ HRA 90.5, maintaining sharp cutting edges at high speeds; under comparable cutting conditions, service life reaches 3-5x that of ordinary HSS taps (actual results vary by application)

Precision Ground Threads: 6H/7H thread accuracy with surface roughness Ra ≤ 0.8 μm, reducing post-machining work and improving first-pass yield

Optional Internal Coolant: Internal coolant holes deliver high-pressure coolant directly to the cutting edge, lowering machining temperature and extending tool life — well suited to high-volume automated production

Flexible Options: TiN / TiCN / AlTiN coating or uncoated; Type C (2P) or Type D (4P) cutting cone; metric M and UNC/UNF thread standards

Left-Hand-Carbide-Cutting-Tap_4

Applications

Automotive: anti-loosening threads for turbocharger components, engine mounts and reverse mechanisms operating under vibration

General machinery: conveyors, industrial pumps and reverse-shaft equipment

Equipment maintenance: repair and replacement of left-hand threads on legacy machinery and existing designs

Suitable materials: aluminum alloy, magnesium alloy, zinc alloy, copper alloy, low carbon steel and medium carbon steel

Hot Q&A

  1. Can a left-hand tap be interchanged with a right-hand tap?

Answer:No. Left-hand taps cut counterclockwise while right-hand taps cut clockwise; mixing them up will produce unusable threads and assembly failures.

  1. How do I choose the right size?

Answer: Match the tap to the required internal thread diameter and pitch (metric M, UNC/UNF), and consider workpiece thickness and hole type. Contact us for selection support.

  1. What affects tap life?

Answer: Workpiece hardness, cutting parameters, coolant conditions and operating practice. Correct matching extends tool life considerably.


  • Previous:
  • Next:

  • Write your message here and send it to us