Chipless Thread Forming Taps Engineered for Magnesium and Zinc Alloys

Short Description:

Our carbide thread forming taps for magnesium alloys adopt chipless cold extrusion technology instead of traditional cutting. Made of solid tungsten carbide with optimized geometry, they deliver high-precision threads, extended tool life and safer machining of magnesium and zinc alloys, especially in blind-hole and thin-wall applications such as die-cast housings.


  • Type: Thread Forming Tap
  • Material: Solid tungsten carbide
  • Thread standard: Metric ISO M
  • Hole typ: Through holes and blind holes
  • Coating: DLC / TiN / uncoated, optional

Product Detail

Product Tags

magnesium-alloy-extrusion-tap_7

Bullet Points

Chipless cold forming:Forms threads by plastic deformation instead of cutting - no chips, no chip evacuation, cleaner holes and higher efficiency in blind holes;

Spark-reduced safety design: Continuous thread profile and low cutting force reduce friction heat and chip build-up, lowering ignition risk when tapping magnesium alloys;

Higher thread strength:Cold forming refines the metal grain structure; cold-formed threads typically show 20-30% higher tensile and shear strength than cut threads, depending on alloy and lubrication;

Longer service life:Premium solid carbide with optimized geometry extends tool life significantly versus conventional HSS taps under proper working conditions;

Better surface finish:Compressed, burnished thread surfaces deliver smooth finish and improved fatigue resistance, reducing secondary processing;

Customization:OEM/ODM support for non-standard sizes, tolerances and logo marking;

magnesium-alloy-extrusion-tap_1

Typical applications

aerospace structural components and housings; automotive and NEV battery enclosures, motor and transmission parts; electronics shielding cases and heat sinks; precision components for food processing equipment. Our taps are widely used by manufacturers machining parts that must meet FDA-regulated and ISO13485-controlled production requirements.

Hot Q&A

  1. Are these taps suitable for all magnesium alloys?

Answer: They are designed for most common magnesium alloys such as AZ91D and AM60. For special grades, share the material report with our engineering team for confirmation.

  1. How do I choose the correct pre-tap hole diameter?

Answer: Cold forming requires a slightly larger hole than cutting taps. Tell us the thread size, and we will provide the recommended hole size and tolerance table.

  1. Can it be used on steel or other materials?

Answer: The geometry is optimized for magnesium and zinc alloys. Using it on steel or aluminum may reduce performance or damage the tap; we offer separate series for other materials.

  1. What maintenance is required?

Answer: Clean after use, always lubricate with tapping oil, and replace when thread quality declines. Forming taps are not reground like cutting taps.


  • Previous:
  • Next:

  • Write your message here and send it to us