Tip tap for front iron filings, Sprial pointed carbide tap

Short Description:

Tool material: tungsten steel,cemented carbide,kentanium,HSS,HSS-E,HSS-PM

Applicable machine: This tap is a kind of tap used for front row iron chip processing, specially used for machining through hole, suitable for machining center, lathe, tapping machine, etc

Send email to us

Product Detail

Specification

Product Tags

Workpiece material hardness: HB200~250

Workpiece material: ferrum-based powder metallurgy

hole depth: 25mm

aperture size: M6*1

recommended parameter: Vc=18.84m/min fr=1mm/r

cutting life: 15000hole

The life of high speed steel tip tap is about twice that of spiral groove tap

Product advantages

Compared with spiral groove taps, the tip taps are relatively prone to iron filings. But it can only process through holes, blind holes can not be used

The tap groove is polished to increase the strength of the cut part of the tip, making it easier to achieve high tool life

If you have a blind hole, you can use a screw tap, tip tap, with coating, easier to achieve high life

Product production, inspection and display

Before ordering, please communicate with our pre-sales customer service:

1. Workpiece material

2. Whether product is surface treated after processing

3. Accuracy requirements, size of go gauge and no go gauge.

Previous: HSSE forming taps rolling taps M UNC UN forming tap for oil filter

Next: Internally cooled drill bit for deep hole machining

Forming tap for Oil Filter-T610

Forming tap for Oil Filter-T610

Forming tap for Oil Filter-T610 a

Designation D	Thread size		Pitch mm	L1 mm	L2 mm	D mm	L mm	Z	a ¨	Pre-drill mm	Guide tooth
T610-050053-M4x0.7	M4	x	0.7	13	21	5	53	4	4	3.25-3.42	2.5P
T610-060058-M5x0.8	M5	x	0.8	16	25	6	58	4	4.5	4.14-4.33	2.5P
T610-060066-M6x1	M6	x	1	19	30	6	66	4	4.5	4.92-5.15	2.5P
T610-080072-M8x1.25	M8	x	1.25	22	35	8	72	5	6.3	6.65-6.91	2.5P
T610-080080-M10x1.5	M10	x	1.5	24	-	8	80	5	6.3	8.38-8.67	2.5P
T610-100089-M12x1.75	M12	x	1.75	29	46	10	89	5	8	10.11-10.44	2.5P

Solid carbide taps for hardend materials-T214

Forming tap for Oil Filter-T610

Solid carbide taps for hardend materials-T214

Designation D	Thread size		Pitch mm	L1 mm	L2 mm	D mm	L mm	Z	a ¨	Pre-drill mm	Guide tooth
T610-050053-M3x0.5	M3	x	0.5	13	21	5	53	4	4	3.46-3.59	5P
T610-050053-M4x0.5	M4	x	0.5	13	21	5	53	4	4	3.46-3.59	5P
T610-050053-M4x0.7	M4	x	0.7	13	21	5	53	4	4	3.25-3.42	5P
T610-060058-M5x0.8	M5	x	0.8	16	25	6	58	4	4.5	4.14-4.33	5P
T610-060066-M6x1	M6	x	1	19	30	6	66	4	4.5	4.92-5.15	5P
T610-080072-M8x1.25	M8	x	1.25	22	35	8	72	5	6.3	6.65-6.91	5P
T610-080080-M10x1.5	M10	x	1.5	24	-	8	80	5	6.3	8.38-8.67	5P
T610-100089-M12x1.75	M12	x	1.75	29	46	10	89	5	8	10.11-10.44	5P

Solid carbide taps for hardend materials-T215

Forming tap for Oil Filter-T610

Solid carbide taps for hardend materials-T215

Designation D	Thread size		Pitch mm	L1 mm	L2 mm	D mm	L mm	Z	a ¨	Pre-drill mm	Guide tooth
T610-050053-M4x0.5	M4	x	0.5	13	21	5	53	4	4	3.46-3.59	5P
T610-050053-M4x0.7	M4	x	0.7	13	21	5	53	4	4	3.25-3.42	5P
T610-060058-M5x0.8	M5	x	0.8	16	25	6	58	4	4.5	4.14-4.33	5P
T610-060066-M6x1	M6	x	1	19	30	6	66	4	4.5	4.92-5.15	5P
T610-080072-M8x1.25	M8	x	1.25	22	35	8	72	5	6.3	6.65-6.91	5P
T610-080080-M10x1.5	M10	x	1.5	24	-	8	80	5	6.3	8.38-8.67	5P
T610-100089-M12x1.75	M12	x	1.75	29	46	10	89	5	8	10.11-10.44	5P